Polder, Senior Territory Gross sales Supervisor at Simpson Robust-Tie, introduces the HTTH6.5 holdown with load our HTT5 and HDU8 merchandise, we advanced a cost-effective strategy to bridge that hole. Sign up for Joe as he delves into the options and advantages of the HTTH6.5 and the way it addresses the wishes of the development box.
At Simpson Robust-Tie, we frequently search for techniques to make stronger our choices for the construction {industry}. All the way through considered one of our periodic product line critiques, we discovered there was once a void to be stuffed in our holdown line for residential building.
Over the past decade, we’ve made strides to make stronger the potency of our HTT4 and HTT5 heavy rigidity ties. We made them extra compact, relocated nail holes, and accommodated use with our Robust-Power® SD Connector screws for greater lots. None of this was once fairly sufficient, on the other hand, for the reason that HTTs’ allowable lots crowned out at about 5,000 lb.
The following higher-capacity holdown was once the HDU8, which is able to strengthen roughly 8,000 lb. lots — overkill for lots of prerequisites. It become transparent the distance between the 2 merchandise had to be bridged, so we had some paintings minimize out for us. We began with a objective of constructing an economical, nail-installed (or SD Connector screw–put in) heavy rigidity tie with a load proper between the HTT5 and HDU8. And we did it!
We’re proud to announce the brand new HTTH6.5 heavy rigidity tie — the primary heavy rigidity tie with uplift values as much as 6,500 lb. the usage of nails. This offers a specifier the choice to make use of a heavy rigidity tie instead of our dearer HDU holdown.
The off-the-shelf charge of HTTH6.5 is less than that of the HDU8. However the place this tie in point of fact shines is in put in charge. The HTTH6.5 makes use of common 0.148″ x 2 1/2″ or 0.162″ x 2 1/2″ nails (pneumatic or hand pushed). And in case your calls for are greater, the HTTH6.5 will also be put in with Simpson Robust-Tie SD #10 x 2 1/2″ Connector screws for a whopping 7,650 lb. load
Options
- 6,500 lb. uplift means (with nails — even greater with SD Connector screws!)
- 4-fold seat reduces deflection
- Tapered base will increase power and decreases deflection
- Optimum nailing trend decreases wooden splitting and maximizes fastener means
- 0.185″ hollow diameter incorporates both nails or SD Connector screws
- Installs with industry-standard pneumatically pushed nails
- Can be utilized in each vertical shearwall programs and in horizontal roof design
The installer will have the benefit of a decrease installed-cost product whilst the specifier may have peace of thoughts understanding they’re calling out the best product for his or her utility.
The HTTH6.5 is incorporated as a holdown answer in our Simpson Robust-Tie Submit-To-Basis Clothier and Web site-Constructed Shearwall Clothier internet apps.
From specification to set up, we need to be sure that everybody makes use of our merchandise with self assurance. Please succeed in out to us at 800-999-5099 for help or consult with strongtie.com/htth.
